You will need the following:
Selection of Christmas fabric strips
1 yard / metre of wide ric rac braiding
Christmas fat quarter, choose one with a good pattern
1/2 yard / metre plain cotton lining fabric
Selection of Christmas ribbons
1/2 yard / metre of cotton batting
Cutting mat, rotary cutter, dressmaking shears
Iron and ironing board
Let's get cracking, iron your fabrics and set them aside. You will need a template to cut around, either use an old stocking and draw around it, or at this time of the year, there are lots around in magazines and Christmas make books (check out your local library, so use one and adapt to suit you... ie, with a longer, wider leg if you think Father Christmas is going to be generous this year!
Cut out two in cotton batting, two in the plain cotton lining and one in your fat Christmas quarter. Lay your Christmas fat quarter on top of one piece of batting, now this is important, really IMPORTANT, lay the other piece of batting down and ensure that the toe is pointing in the OPPOSITE direction.
Now we are going to layer up the stocking, cut strips of varying widths, now play with them, see which ones work best together. You could lay them in parallel lines down the stocking or fan them out around the heel.
Sew down the strip at the top of stocking using a 1/4" seam allowance, now sew the next strip to the first strip, iron the seam open, continue this until it covers the whole of the stocking. Trim the excess from around the stocking.
Now the fun starts... more is more at Christmas, pop some ribbon over the seams, for the other seams use an embroidery stitch in a contrasting colour... one of those that you have on your machine but never use. You could apply some applique, a snowman or a child's name... make sure you choose children with short names or we could be making Easter stockings!
Pin your ric rac braiding so that the centre is 5/8" away from the edge and sew it down.
Place the two linings together, now put the back of your stocking with the right side up on top of them and finally put the front of your stocking face down so that you can see the reverse. Pin them all together.
You will be able to see the line of sewing that you made to attach the braid. Sew along that line, do not deviate away from it, stay with it all the way around. When you have finished, trim and notch the curves... for a small project like this pinking shears will give you the easing you need.
You will now have a raw edge, iron under 5/8" and pin it over the top of the stocking... now you can either slip stitch it into place or top stitch it into place.
Cut a strip of fabric 12" x 3", fold it in half lengthwise, sew across the end and down the length, trim the excess and turn it inside out. Press and fold it in half... so that you have a handle, pin it inside the stocking on the back on the heel side. Machine it into place and now it is ready to hang at the end of your bed or on your fireplace.